By FOAMTEC
Supplier InfoProduct Type:
Parts & Consumables
Application:
Mops
Product Description:
PharmaMOP® is designed for cleanroom cleaning SOP’s. The light weight, 360 degree rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle , wringer less bucket system and drip resistant mop heads allow operators to efficiently carry out SOP’s with improved ergonomics. PharmaMOP® can be used with figure eight, front to back or top to bottom motions and the rotating mop frame enable cleaning of tight spaces. The PharmaMOP® handle and SingleSTEP™ mop heads have been designed to allow for greatly improved cleaning efficiency of soils and residues from difficult to clean textured floors while at the same time allowing ease of mopping. The entire PharmaMOP® system is compatible with steam sterilization and all of the major disinfectants.
PharmaMOP® mop heads are constructed with a foam core sandwiched between two layers of cleanroom fabric. The fabric is ultrasonically welded around the perimeter to guard against fiber contamination. PharmaMOP® mop heads are produced on a fully automated production line in an FDA licensed ISO class 8 clean room and are designed to meet cleaning and disinfection SOP’s in cGMP facilities. Compatible with bleach, peracitic acid, phenolics, Quat and IPA based disinfectants and sanitizers. PharmaMOP® mop heads are availiable gamma iradiated with a SAL 10-6 for use in aseptic processing areas. All mopheads are individually packed and double bagged to ensure compliance with cleanroom procedures.
PharmaMOP® Handle Advantages
• 360° Swivel. A two direction 360° swivel and mop head with a 1.5″ low profile design enables unsurpassed access to tight spaces reducing uncleanable dead spots.
• All Surface Design. An all surface, large area design, compatible with pull and figure eight motions, simplify SOPs and reduce costs by eliminating the need for multiple mop types.
• Improved Ergonomics. An ultra-lightweight telescoping handle and extensions reduce operator fatigue and cleaning time for high spaces.
• No Wringer Required. Designed to work without complex wringers that are prone to rust.
PharmaMOP® Mop Head Advantages
• Drip Resistant. Wringerless Design. PharmaMOP® mop heads are designed so operators can adjust saturation levels without a mechanical wringer.
• Ease of Use. PharmaMOP® mop heads enable operators to meet disinfectant contact times without suffering dripping and weight penalties so typical with clean room mops.
• Available Gamma Irradiated. Certified 10-6 SAL in a ISO 9001:2000 & 13485:2003 certified facility for use in aseptic processing areas.
• Robust Cleaning and Disinfection. PharmaMOP® mop heads are available with a unique hybrid microfiber fabric which enable robust removal of soils while simultaneously meeting disinfectant contact time specifications required by cGMP cleaning and disinfection SOP’s.
PharmaMOP® Handles & Accessories
FT414D
Size: 3.75″ x 14″ (Head Frame)
36″ – 61″ (Adjustable Handle)
Weight: 476g (1.05lbs)
PharmaMOP® Handle w/ Locking Head Frame and Lever Lock on Telescoping Handle.
FT416D
Size: 3.75″ x 16″ (Head Frame)
36″ – 61″ (Adjustable Handle)
Weight: 499g (1.1lbs)
PharmaMOP® Handle w/ Locking Head Frame and Lever Lock on Telescoping Handle.
FT414C
Size: 3.75″ x 14″ (Head Frame)
PharmaMOP® Handle w/ Locking Head Frame and Extendable Handle with attachments.
FT416C
Size: 3.75″ x 16″ (Head Frame)
PharmaMOP® Handle w/ Locking Head Frame and Extendable Handle with attachments.
FT420
Size: 3′
Weight: 180g (0.39lbs)
PharmaMOP® 3′ aluminum extension shaft. Connects to FT418C and FT423.
FT423
Size: 5′
Weight: 300g (0.66lbs)
PharmaMOP® 5′ aluminum extension shaft. Connects to FT418C and FT420.
FT424
PharmaMOP® Press Clips, Set of 12 replacement clips.
PharmaMOP® Mop Heads
FS853
Size: 0.25″ x 5″ x 16.5″
PharmaMOP® Head for application of standard volumes of disinfectant cleaners to ceilings, walls and floors. Polyester over foam construction provide abrasion free mopping for ISO Class 1-7 cleanrooms.
FS853ST
Size: 0.25″ x 5″ x 16.5″
Sterile PharmaMOP® Head for application of standard volumes of disinfectant cleaners to ceilings, walls and floors. Polyester over foam construction provide abrasion free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.
FS853EN
Size: 0.25″ x 5″ x 16.5″
PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms..
FS853ENST
Size: 0.25″ x 5″ x 16.5″
PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms..
FS856
Size: 0.5″ x 6.5″ x 16.5″
PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms..
FS856ST
Size: 0.5″ x 6.5″ x 16.5″
Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.
FS856EN
Size: 0.5″ x 6.5″ x 16.5″
Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.
FS856ENST
Size: 0.5″ x 6.5″ x 16.5″
Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.
FS858EN
Size: 0.5″ x 5.5″ x 16.5″
PharmaMOP® Head constructed with clean-room micro fiber fabric over foam for removing heavy residues from aseptic processing areas. Ideal for SOPs designed to remove bleach and sporicide residues.
FS858ENST
Size: 0.5″ x 5.5″ x 16.5″
Sterile PharmaMOP® Head constructed with cleanroom micro fiber fabric over foam for removing heavy residues from aseptic processing areas. Ideal for SOPs designed to remove bleach and sporicide residues. Gamma irradiated to SAL 10-6.
FS859
Size: 0.25″ x 5″ x 16″
Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors.
FS859ST
Size: 0.25″ x 5″ x 16″
Sterile Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors. Gamma irradiated to SAL 10-6.
FS859SH
Size: 0.25″ x 5″ x 16″
A Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric over a Sahara™ foam core with strips of Sahara™ foam on the front and back end to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. This mop is designed for weekly super cleans where it is important to strip heavy soils and residues from floors, walls, stainless steel and windows.
GS859SH – NEW Green Color
Size: 0.25″ x 5″ x 16″
A Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric over a Sahara™ foam core with strips of Sahara™ foam on the front and back end to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. This mop is designed for weekly super cleans where it is important to strip heavy soils and residues from floors, walls, stainless steel and windows.
FS869
Size: 0.55″ x 5″ x 16″
A Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for the application of large volumes of disinfectant cleaners to ceilings, walls and floors. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors.
- 360° Swivel. A two direction 360° swivel and mop head with a 1.5″ low profile design enables unsurpassed access to tight spaces reducing uncleanable dead spots.
- All Surface Design. An all surface, large area design, compatible with pull and figure eight motions, simplify SOPs and reduce costs by eliminating the need for multiple mop types.
- Improved Ergonomics. An ultra-lightweight telescoping handle and extensions reduce operator fatigue and cleaning time for high spaces.
- No Wringer Required. Designed to work without complex wringers that are prone to rust.
Drip Resistant. Wringerless Design. PharmaMOP® mop heads are designed so operators can adjust saturation levels without a mechanical wringer. - Ease of Use. PharmaMOP® mop heads enable operators to meet disinfectant contact times without suffering dripping and weight penalties so typical with clean room mops.
- Available Gamma Irradiated. Certified 10-6 SAL in a ISO 9001:2000 & 13485:2003 certified facility for use in aseptic processing areas.
- Robust Cleaning and Disinfection. PharmaMOP® mop heads are available with a unique hybrid microfiber fabric which enable robust removal of soils while simultaneously meeting disinfectant contact time specifications required by cGMP cleaning and disinfection SOP’s.